Waterproofing a Basement: Affordable Do It Yourself Solutions

Waterproofing a basement floor is a main concern for a lot of homeowners as water can dramatically affect the walls and floors of the basement, hence they see white mold in basement because of an always wet basement floor. There are different methods to do this as this article will discuss. Before you do the project at hand, be sure to learn about basement waterproofing cost. If the solution that you found can be easily done, you may also want to think of finishing a basement yourself in order to cut on costs of labor.

Waterproofing a BasementWaterproofing a Basement: French Drain and Piping

A good way to prevent water from coming into your home is by creating a French drain around the house and one which goes all throughout the house. This method can prevent a good amount of water from coming inside and flooding your basement. When using the solution in waterproofing a basement, it is important that you make the drain a few feet away from your house so that rain water is prevented from coming into the basement. A French drain doesn’t really ensure that it will keep the water away from your basement, but it will reduce the amount of water coming into it by a significant volume.

Waterproofing a Basement: Waterproofing Paint

This is a common solution in preventing water from seeping into the basement. You can use a coat of waterproofing paint in your basement and a primer in order to do this. This is quite effective if the ground water level and the rainfall in your place is somewhat low. You can also paint the outside walls of your basement as well as inside it.

Waterproofing a Basement: Waterproofing Cement

With waterproofing using cement, results are more durable. You can spray or apply waterproofing cement on your basement walls and floors. It would be advisable if you do this method before installing tiles and the flooring. You can also look for cements and other solutions to fill in gaps, cracks and crannies on your walls or basement floors before applying a coat of waterproofing cement.

Waterproofing a Basement: Waterproofing Foam

Waterproofing foam has been recently introduced in the market as an aid to waterproofing a basement. Although this type of foam is mainly used for ceilings and walls, applying it below your flooring is also a great solution since this waterproofing agent can trap the water under the basement floor.

Waterproofing a Basement: Pump Installation

In some situations, a pump is set up in a small chamber that is dug into the basement floor. The purpose of doing this is to pump the excess water seeping into your basement floor as a means of waterproofing a basement. But this solution can be quite costly and complex than other methods since you would need some installation and operation costs.

These are just the most common and affordable solutions to prevent water from coming into the basement. You can use one or even a combination of methods together in order to ensure a hundred percent dry basement. Just remember that waterproofing a basement can be a simple and easy task if you have some background knowledge on some of the affordable solutions.

 


If you require more information, please visit the following sites that are authorities in this topic...


white mold in basement
basement insulation. office of building technology state and ...


Next post: